
Products \
Dry cement-mineral mixes \
Tsemins TSE
Dry cement-mineral mix for making emergence repair works
Field of application:
Making repair works on emergency parts of carriage way, for example highway or aerodromes.
Concrete characteristics based on TSEMINS TSE:
- Rapid stiffening;
- Rapid hardening;
- It is cement composition with fine-grained addition;
- Ready to use after water adding;
- Waterproofing;
- Steam-tighting;
- Cold resistance and influence of salt resistance.
Technical characteristics:
| 1. Base mixture: |
|
| base |
mineral |
| bulk weight, kg/m3
|
1800-2100 |
| size of mineral additives, mm |
to 10 |
| package, kg |
25, 50 |
| retention cycle in hermetic package |
to 12 months |
| |
|
| 2. Concrete solution: |
|
| Water-solid proportion, relative unit |
0,12-0,14 |
| Time of setting, min |
|
| Beginning |
7-12 |
| End |
15-18 |
| Slump, cm |
1-4 |
| |
|
| 3. Concrete: |
|
| compressive strength, 106 Pascal: |
|
| 4
hours |
15-20 |
| 28
days |
50-60 |
| adhesion to repairing concrete, 106 Pascal |
10-1,5 |
| Corrosive resistance factor (5% solution Na2SO4), relative unit |
1,01 |
| Water resistance, atmosphere |
8 |
| ðÍ factor |
12,4 |
| dilation |
unshrinkable |
| time of technological mobility retention, min |
100-150 |
Methods of preparation:
- Concrete solution is prepared in concrete mixers (mortar mills) to getting homogeneous mobility mix
Rate of application of TSEMIS TSE: 1,6-1,8 t/m3
Methods of solutions to technological cavities transportation:
- by building mortar pump;
- filling by hand.
|